Satin Glass

Product Options

Shape

Choose the shape of the glass

Thickness

Choose the thickness of the glass

Size (mm)

Width (A)

Change the base width of the current shape

Height (B)

Change the height of the current shape

Radius (R)

Change the radius of the circle

Diameter (D)

Change the radius of the circle

Additional (C)

Change length C of the current shape

Additional (D)

Change length D of the current shape

Please note we have a +/- 2mm tolerance all our glass

Product Extras

Spacer Color

Pattern Type

Etched Type

Upgrade to Krypton Gas

Krypton Gas provides far superior insulation. Heavier than air, the gases help to maintain a constant temperature in the home as well as offering better soundproofing too.

Edgework Arrised Edges

Remove sharp edges

Polished Edges

A smooth, flat edge.

Please note if no polished edges are required edgework quality is not guaranteed.

Finishing Sandblast

All over sandblasting added to glass to give a white frosted effect

Sandblast Borders

Sandblasted border added to the glass

Additional Safety Backing

A Clear Film applied to the backing of the mirror to help keep the mirror together if it breaks. If you are fixing the mirror with adhesive, please check your adhesive is suitable to use with Safety Backing

Centralise/ Line Through Neither Centralise

For Single panels. The glass will be cut with the pattern in the centre of the glass

Line Through

For Multiple Panels. Used with panels that are next to each other, so the pattern continues through all the panels. Please note we will require a drawing showing the layout of the panels

Self Cleaning

An easy clean coating that is applied to the glass that allows water to run off the glass. Most commonly used for shower screens

Drilled holes

Amount

Size

The minimum drilled hole diameter is 4mm and the maximum is 38mm. Drilled holes cannot be less than the glass thickness. Drilled holes are usually used for fixing holes in glass.

Fan holes

Amount

Size

These are circular drilled holes, larger than 38mm. Usually used for Fans, Vents or pet flaps

Radius Corners

Amount

Size

Curved outer edge on corners. The higher the radius, the greater the curve

Cut Outs/ Notches/ Edge Cuts

Amount

An internal section of the glass is cut out to accommodate plug sockets, pipework, hobs, etc.

Paint Colour

Please select the RAL colour for your painted glass

Quantity :

Exc. VAT £95.26
£114.31

Upload Drawing
If you have any drawing of the piece of glass you'd like produced please upload them below

You are about to add this custom item to your cart.

Please ensure that your specifications are correct and complete, as UK Glass Centre will not accept responsibility for any errors in data entry.

Note that there are no refunds or replacements for custom items.

I understand

Satin Glass

Product Description

Product Options

Product Extras

£114.31

Write a review

Satin Glass

Product Description

Product Options

Product Extras

£114.31

Write a review

Related Products

Glass Fire Hearth - Toughened Low Iron

Satin Glass Sample 4mm/ 6mm/ 10mm